Loading... 
Brand: Spears
Spears 722311-020 Butterfly Valve, 2 in Nominal, Flanged End Style, 150 lb, PVC Body, EPDM Softgoods, Domestic
$641.87
722311-020 SPEARS 2 PVC BUTTERFLY VALVE EPDM W/HANDLE 722311-020 SPEARS 2 PVC BUTTERFLY V
Free Shippingon qualified orders over $99* 
Easy ReturnsHassle - free returns 
Authorized Dealer100% Genuine Products 
Expert Support(940) 331-6300 
Secure CheckoutSSL Encrypted Payments Spears Butterfly Valve, 2 in Nominal, Flanged, 150 lb, 140 deg F, Lever Handle Actuator, 1-15/16 in Inlet to Outlet Length, 6-13/32 in Top to Inlet Center, PVC Body, 316L Stainless Steel (Stem) Stem & Pin Material, EPDM, Gray, 6 in Dia x 9-11/32 in H, Domestic
Spears patented butterfly valve design departs from traditional liner-seat type valve to eliminate seat creep, reduce operating torque and provide positive seal-off. Ideally suited for flow control or throttling, this high-performance valve is offered with a full variety of options for greater application versatility in industrial and chemical processing applications. Available in IPS sizes 1-1/2-14 in Standard or 1-1/2-12 in true lug (factory installed lugs) style.
| Category | Butterfly Valve |
|---|---|
| Item Weight (lbs) | 3.22 lbs |
| Size | 2 In |
| Color | Gray |
| Material | PVC |
| Brand | Spears |
- Special off-set Disc lifts quickly from seat to reduce wear and reduce operating torque
- Pressure rated to 150 psi at 73 deg F including dead-end service
- Valves with EPDM seals and seats are NSF® certified for potable water use
- EPDM O-ring
- Patented limited contact seat design provides free travel, eliminates seat creep, extrusion and wear, field replaceable without full valve disassembly
- Interlocking body and seat prevents wash-out or blow-out
- Fully isolated solid type 316L stainless steel stem
- Reversible high impact polypropylene lever handle with 7-Position stops and built-in lockout (Standard handle on 1-1/2 - 8 in valves, not available on 10 in and larger valves)
- High efficiency gear operator with cast aluminum housing, polypropylene handwheel and built-In position indicator
- Lug insert style valve has factory installed stainless steel 316 or zinc plated steel lug inserts
- Standard valve accepts field-installable lug inserts set option
- True lug design has factory installed zinc plated or stainless steel 316 lugs and is specially designed for connection to either side of valve
Write Your Own Review